 |
|
Модераторы: Snowy, bartram, MetalFan, bems, Poseidon, Riply |
 
|
|
||
|
|
Коды ошибок... недюсь кому-нибудь понадобится 
| -=::BlackCat::=- |
|
|||
 Эксперт  Профиль Группа: Участник Клуба Сообщений: 1456 Регистрация: 12.7.2003 Где: растёт анаша? Репутация: нет Всего: 6 |
1: Incorrect function 2: The system cannot find the file specified 3: The system cannot find the path specified 4: The system cannot open the file 5: Access is denied 6: The handle is invalid 7: The storage control blocks were destroyed 8: Not enough storage is available to process this command 9: The storage control block address is invalid 10: The environment is incorrect 11: An attempt was made to load a program with an incorrect format 12: The access code is invalid 13: The data is invalid 14: Not enough storage is available to complete this operation 15: The system cannot find the drive specified 16: The directory cannot be removed 17: The system cannot move the file to a different disk drive 18: There are no more files 19: The media is write protected 20: The system cannot find the device specified 21: The device is not ready 22: The device does not recognize the command 23: Data error (cyclic redundancy check) 24: The program issued a command but the command length is incorrect 25: The drive cannot locate a specific area or track on the disk 26: The specified disk or diskette cannot be accessed 27: The drive cannot find the sector requested 28: The printer is out of paper 29: The system cannot write to the specified device 30: The system cannot read from the specified device 31: A device attached to the system is not functioning 32: The process cannot access the file because it is being used by another process 33: The process cannot access the file because another process has locked a portion of the file 34: The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1 36: Too many files opened for sharing 38: Reached the end of the file 39: The disk is full 50: The request is not supported 51: Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator 52: You were not connected because a duplicate name exists on the network. Go to System in Control Panel to change the computer name and try again 53: The network path was not found 54: The network is busy 55: The specified network resource or device is no longer available 56: The network BIOS command limit has been reached 57: A network adapter hardware error occurred 58: The specified server cannot perform the requested operation 59: An unexpected network error occurred 60: The remote adapter is not compatible 61: The printer queue is full 62: Space to store the file waiting to be printed is not available on the server 63: Your file waiting to be printed was deleted 64: The specified network name is no longer available 65: Network access is denied 66: The network resource type is not correct 67: The network name cannot be found 68: The name limit for the local computer network adapter card was exceeded 69: The network BIOS session limit was exceeded 70: The remote server has been paused or is in the process of being started 71: No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept 72: The specified printer or disk device has been paused 80: The file exists 82: The directory or file cannot be created 83: Fail on INT 24 84: Storage to process this request is not available 85: The local device name is already in use 86: The specified network password is not correct 87: The parameter is incorrect 88: A write fault occurred on the network 89: The system cannot start another process at this time 100: Cannot create another system semaphore 101: The exclusive semaphore is owned by another process 102: The semaphore is set and cannot be closed 103: The semaphore cannot be set again 104: Cannot request exclusive semaphores at interrupt time 105: The previous ownership of this semaphore has ended 106: Insert the diskette for drive %1 107: The program stopped because an alternate diskette was not inserted 108: The disk is in use or locked by another process 109: The pipe has been ended 110: The system cannot open the device or file specified 111: The file name is too long 112: There is not enough space on the disk 113: No more internal file identifiers available 114: The target internal file identifier is incorrect 117: The IOCTL call made by the application program is not correct 118: The verify-on-write switch parameter value is not correct 119: The system does not support the command requested 120: This function is not supported on this system 121: The semaphore timeout period has expired 122: The data area passed to a system call is too small 123: The filename, directory name, or volume label syntax is incorrect 124: The system call level is not correct 125: The disk has no volume label 126: The specified module could not be found 127: The specified procedure could not be found 128: There are no child processes to wait for 129: The %1 application cannot be run in Win32 mode 130: Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O 131: An attempt was made to move the file pointer before the beginning of the file 132: The file pointer cannot be set on the specified device or file 133: A JOIN or SUBST command cannot be used for a drive that contains previously joined drives 134: An attempt was made to use a JOIN or SUBST command on a drive that has already been joined 135: An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted 136: The system tried to delete the JOIN of a drive that is not joined 137: The system tried to delete the substitution of a drive that is not substituted 138: The system tried to join a drive to a directory on a joined drive 139: The system tried to substitute a drive to a directory on a substituted drive 140: The system tried to join a drive to a directory on a substituted drive 141: The system tried to SUBST a drive to a directory on a joined drive 142: The system cannot perform a JOIN or SUBST at this time 143: The system cannot join or substitute a drive to or for a directory on the same drive 144: The directory is not a subdirectory of the root directory 145: The directory is not empty 146: The path specified is being used in a substitute 147: Not enough resources are available to process this command 148: The path specified cannot be used at this time 149: An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute 150: System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed 151: The number of specified semaphore events for DosMuxSemWait is not correct 152: DosMuxSemWait did not execute; too many semaphores are already set 153: The DosMuxSemWait list is not correct 154: The volume label you entered exceeds the label character limit of the target file system 155: Cannot create another thread 156: The recipient process has refused the signal 157: The segment is already discarded and cannot be locked 158: The segment is already unlocked 159: The address for the thread ID is not correct 160: One or more arguments are not correct 161: The specified path is invalid 162: A signal is already pending 164: No more threads can be created in the system 167: Unable to lock a region of a file 170: The requested resource is in use 173: A lock request was not outstanding for the supplied cancel region 174: The file system does not support atomic changes to the lock type 180: The system detected a segment number that was not correct 182: The operating system cannot run %1 183: Cannot create a file when that file already exists 186: The flag passed is not correct 187: The specified system semaphore name was not found 188: The operating system cannot run %1 189: The operating system cannot run %1 190: The operating system cannot run %1 191: Cannot run %1 in Win32 mode 192: The operating system cannot run %1 193: %1 is not a valid Win32 application 194: The operating system cannot run %1 195: The operating system cannot run %1 196: The operating system cannot run this application program 197: The operating system is not presently configured to run this application 198: The operating system cannot run %1 199: The operating system cannot run this application program 200: The code segment cannot be greater than or equal to 64K 201: The operating system cannot run %1 202: The operating system cannot run %1 203: The system could not find the environment option that was entered 205: No process in the command subtree has a signal handler 206: The filename or extension is too long 207: The ring 2 stack is in use 208: The global filename characters, * or ?, are entered incorrectly or too many global filename characters are specified 209: The signal being posted is not correct 210: The signal handler cannot be set 212: The segment is locked and cannot be reallocated 214: Too many dynamic-link modules are attached to this program or dynamic-link module 215: Cannot nest calls to LoadModule 216: The image file %1 is valid, but is for a machine type other than the current machine 230: The pipe state is invalid 231: All pipe instances are busy 232: The pipe is being closed 233: No process is on the other end of the pipe 234: More data is available 240: The session was canceled 254: The specified extended attribute name was invalid 255: The extended attributes are inconsistent 258: The wait operation timed out 259: No more data is available 266: The copy functions cannot be used 267: The directory name is invalid 275: The extended attributes did not fit in the buffer 276: The extended attribute file on the mounted file system is corrupt 277: The extended attribute table file is full 278: The specified extended attribute handle is invalid 282: The mounted file system does not support extended attributes 288: Attempt to release mutex not owned by caller 298: Too many posts were made to a semaphore 299: Only part of a ReadProcessMemory or WriteProcessMemory request was completed 300: The oplock request is denied 301: An invalid oplock acknowledgment was received by the system 302: The volume is too fragmented to complete this operation 303: The file cannot be opened because it is in the process of being deleted 317: The system cannot find message text for message number 0x%1 in the message file for %2 487: Attempt to access invalid address 534: Arithmetic result exceeded 32 bits 535: There is a process on other end of the pipe 536: Waiting for a process to open the other end of the pipe 994: Access to the extended attribute was denied 995: The I/O operation has been aborted because of either a thread exit or an application request 996: Overlapped I/O event is not in a signaled state 997: Overlapped I/O operation is in progress 998: Invalid access to memory location 999: Error performing inpage operation 1001: Recursion too deep; the stack overflowed 1002: The window cannot act on the sent message 1003: Cannot complete this function 1004: Invalid flags 1005: The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted 1006: The volume for a file has been externally altered so that the opened file is no longer valid 1007: The requested operation cannot be performed in full-screen mode 1008: An attempt was made to reference a token that does not exist 1009: The configuration registry database is corrupt 1010: The configuration registry key is invalid 1011: The configuration registry key could not be opened 1012: The configuration registry key could not be read 1013: The configuration registry key could not be written 1014: One of the files in the registry database had to be recovered by use of a log or alternate copy. The recovery was successful 1015: The registry is corrupted. The structure of one of the files containing registry data is corrupted, or the system's memory image of the file is corrupted, or the file could not be recovered because the alternate copy or log was absent or corrupted 1016: An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry 1017: The system has attempted to load or restore a file into the registry, but the specified file is not in a registry file format 1018: Illegal operation attempted on a registry key that has been marked for deletion 1019: System could not allocate the required space in a registry log 1020: Cannot create a symbolic link in a registry key that already has subkeys or values 1021: Cannot create a stable subkey under a volatile parent key 1022: A notify change request is being completed and the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes 1051: A stop control has been sent to a service that other running services are dependent on 1052: The requested control is not valid for this service 1053: The service did not respond to the start or control request in a timely fashion 1054: A thread could not be created for the service 1055: The service database is locked 1056: An instance of the service is already running 1057: The account name is invalid or does not exist, or the password is invalid for the account name specified 1058: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it 1059: Circular service dependency was specified 1060: The specified service does not exist as an installed service 1061: The service cannot accept control messages at this time 1062: The service has not been started 1063: The service process could not connect to the service controller 1064: An exception occurred in the service when handling the control request 1065: The database specified does not exist 1066: The service has returned a service-specific error code 1067: The process terminated unexpectedly 1068: The dependency service or group failed to start 1069: The service did not start due to a logon failure 1070: After starting, the service hung in a start-pending state 1071: The specified service database lock is invalid 1072: The specified service has been marked for deletion 1073: The specified service already exists 1074: The system is currently running with the last-known-good configuration 1075: The dependency service does not exist or has been marked for deletion 1076: The current boot has already been accepted for use as the last-known-good control set 1077: No attempts to start the service have been made since the last boot 1078: The name is already in use as either a service name or a service display name 1079: The account specified for this service is different from the account specified for other services running in the same process 1080: Failure actions can only be set for Win32 services, not for drivers 1081: This service runs in the same process as the service control manager. Therefore, the service control manager cannot take action if this service's process terminates unexpectedly 1082: No recovery program has been configured for this service 1083: The executable program that this service is configured to run in does not implement the service 1084: This service cannot be started in Safe Mode 1100: The physical end of the tape has been reached 1101: A tape access reached a filemark 1102: The beginning of the tape or a partition was encountered 1103: A tape access reached the end of a set of files 1104: No more data is on the tape 1105: Tape could not be partitioned 1106: When accessing a new tape of a multivolume partition, the current block size is incorrect 1107: Tape partition information could not be found when loading a tape 1108: Unable to lock the media eject mechanism 1109: Unable to unload the media 1110: The media in the drive may have changed 1111: The I/O bus was reset 1112: No media in drive 1113: No mapping for the Unicode character exists in the target multi-byte code page 1114: A dynamic link library (DLL) initialization routine failed 1115: A system shutdown is in progress 1116: Unable to abort the system shutdown because no shutdown was in progress 1117: The request could not be performed because of an I/O device error 1118: No serial device was successfully initialized. The serial driver will unload 1119: Unable to open a device that was sharing an interrupt request (IRQ) with other devices. At least one other device that uses that IRQ was already opened 1120: A serial I/O operation was completed by another write to the serial port. (The IOCTL_SERIAL_XOFF_COUNTER reached zero.) 1121: A serial I/O operation completed because the timeout period expired. (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.) 1122: No ID address mark was found on the floppy disk 1123: Mismatch between the floppy disk sector ID field and the floppy disk controller track address 1124: The floppy disk controller reported an error that is not recognized by the floppy disk driver 1125: The floppy disk controller returned inconsistent results in its registers 1126: While accessing the hard disk, a recalibrate operation failed, even after retries 1127: While accessing the hard disk, a disk operation failed even after retries 1128: While accessing the hard disk, a disk controller reset was needed, but even that failed 1129: Physical end of tape encountered 1130: Not enough server storage is available to process this command 1131: A potential deadlock condition has been detected 1132: The base address or the file offset specified does not have the proper alignment 1140: An attempt to change the system power state was vetoed by another application or driver 1141: The system BIOS failed an attempt to change the system power state 1142: An attempt was made to create more links on a file than the file system supports 1150: The specified program requires a newer version of Windows 1151: The specified program is not a Windows or MS-DOS program 1152: Cannot start more than one instance of the specified program 1153: The specified program was written for an earlier version of Windows 1154: One of the library files needed to run this application is damaged 1155: No application is associated with the specified file for this operation 1156: An error occurred in sending the command to the application 1157: One of the library files needed to run this application cannot be found 1158: The current process has used all of its system allowance of handles for Window Manager objects 1159: The message can be used only with synchronous operations 1160: The indicated source element has no media 1161: The indicated destination element already contains media 1162: The indicated element does not exist 1163: The indicated element is part of a magazine that is not present 1164: The indicated device requires reinitialization due to hardware errors 1165: The device has indicated that cleaning is required before further operations are attempted 1166: The device has indicated that its door is open 1167: The device is not connected 1168: Element not found 1169: There was no match for the specified key in the index 1170: The property set specified does not exist on the object 1171: The point passed to GetMouseMovePoints is not in the buffer 1172: The tracking (workstation) service is not running 1173: The Volume ID could not be found 1175: Unable to remove the file to be replaced 1176: Unable to move the replacement file to the file to be replaced. The file to be replaced has retained its original name 1177: Unable to move the replacement file to the file to be replaced. The file to be replaced has been renamed using the backup name 1178: The volume change journal is being deleted 1179: The volume change journal is not active 1180: A file was found, but it may not be the correct file 1181: The journal entry has been deleted from the journal 1200: The specified device name is invalid 1201: The device is not currently connected but it is a remembered connection 1202: The local device name has a remembered connection to another network resource 1203: No network provider accepted the given network path 1204: The specified network provider name is invalid 1205: Unable to open the network connection profile 1206: The network connection profile is corrupted 1207: Cannot enumerate a noncontainer 1208: An extended error has occurred 1209: The format of the specified group name is invalid 1210: The format of the specified computer name is invalid 1211: The format of the specified event name is invalid 1212: The format of the specified domain name is invalid 1213: The format of the specified service name is invalid 1214: The format of the specified network name is invalid 1215: The format of the specified share name is invalid 1216: The format of the specified password is invalid 1217: The format of the specified message name is invalid 1218: The format of the specified message destination is invalid 1219: Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again 1220: An attempt was made to establish a session to a network server, but there are already too many sessions established to that server 1221: The workgroup or domain name is already in use by another computer on the network 1222: The network is not present or not started 1223: The operation was canceled by the user 1224: The requested operation cannot be performed on a file with a user-mapped section open 1225: The remote system refused the network connection 1226: The network connection was gracefully closed 1227: The network transport endpoint already has an address associated with it 1228: An address has not yet been associated with the network endpoint 1229: An operation was attempted on a nonexistent network connection 1230: An invalid operation was attempted on an active network connection 1231: The network location cannot be reached. For information about network troubleshooting, see Windows Help 1232: The network location cannot be reached. For information about network troubleshooting, see Windows Help 1233: The network location cannot be reached. For information about network troubleshooting, see Windows Help 1234: No service is operating at the destination network endpoint on the remote system 1235: The request was aborted 1236: The network connection was aborted by the local system 1237: The operation could not be completed. A retry should be performed 1238: A connection to the server could not be made because the limit on the number of concurrent connections for this account has been reached 1239: Attempting to log in during an unauthorized time of day for this account 1240: The account is not authorized to log in from this station 1241: The network address could not be used for the operation requested 1242: The service is already registered 1243: The specified service does not exist 1244: The operation being requested was not performed because the user has not been authenticated 1245: The operation being requested was not performed because the user has not logged on to the network. The specified service does not exist 1246: Continue with work in progress 1247: An attempt was made to perform an initialization operation when initialization has already been completed 1248: No more local devices 1249: The specified site does not exist 1250: A domain controller with the specified name already exists 1251: This operation is supported only when you are connected to the server 1252: The group policy framework should call the extension even if there are no changes 1253: The specified user does not have a valid profile 1254: This operation is not supported on a Microsoft Small Business Server 1255: The server machine is shutting down 1256: The remote system is not available. For information about network troubleshooting, see Windows Help 1257: The security identifier provided is not from an account domain 1258: The security identifier provided does not have a domain component 1259: AppHelp dialog canceled thus preventing the application from starting 1260: Windows cannot open this program because it has been prevented by a software restriction policy. For more information, open Event Viewer or contact your system administrator 1261: A program attempt to use an invalid register value. Normally caused by an uninitialized register. This error is Itanium specific 1262: The share is currently offline or does not exist 1263: The kerberos protocol encountered an error while validating the KDC certificate during smartcard logon 1264: The kerberos protocol encountered an error while attempting to utilize the smartcard subsystem 1265: The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you 1266: The smartcard certificate used for authentication has been revoked. Please contact your system administrator. There may be additional information in the event log 1267: An untrusted certificate authority was detected While processing the smartcard certificate used for authentication. Please contact your system administrator 1268: The revocation status of the smartcard certificate used for authentication could not be determined. Please contact your system administrator 1269: The smartcard certificate used for authentication was not trusted. Please contact your system administrator 1270: The smartcard certificate used for authentication has expired. Please contact your system administrator 1271: The machine is locked and can not be shut down without the force option 1273: An application-defined callback gave invalid data when called 1274: The group policy framework should call the extension in the synchronous foreground policy refresh 1275: This driver has been blocked from loading 1276: A dynamic link library (DLL) referenced a module that was neither a DLL nor the process's executable image 1300: Not all privileges referenced are assigned to the caller 1301: Some mapping between account names and security IDs was not done 1302: No system quota limits are specifically set for this account 1303: No encryption key is available. A well-known encryption key was returned 1304: The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string 1305: The revision level is unknown 1306: Indicates two revision levels are incompatible 1307: This security ID may not be assigned as the owner of this object 1308: This security ID may not be assigned as the primary group of an object 1309: An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client 1310: The group may not be disabled 1311: There are currently no logon servers available to service the logon request 1312: A specified logon session does not exist. It may already have been terminated 1313: A specified privilege does not exist 1314: A required privilege is not held by the client 1315: The name provided is not a properly formed account name 1316: The specified user already exists 1317: The specified user does not exist 1318: The specified group already exists 1319: The specified group does not exist 1320: Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member 1321: The specified user account is not a member of the specified group account 1322: The last remaining administration account cannot be disabled or deleted 1323: Unable to update the password. The value provided as the current password is incorrect 1324: Unable to update the password. The value provided for the new password contains values that are not allowed in passwords 1325: Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirement of the domain 1326: Logon failure: unknown user name or bad password 1327: Logon failure: user account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a policy restriction has been enforced 1328: Logon failure: account logon time restriction violation 1329: Logon failure: user not allowed to log on to this computer 1330: Logon failure: the specified account password has expired 1331: Logon failure: account currently disabled 1332: No mapping between account names and security IDs was done 1333: Too many local user identifiers (LUIDs) were requested at one time 1334: No more local user identifiers (LUIDs) are available 1335: The subauthority part of a security ID is invalid for this particular use 1336: The access control list (ACL) structure is invalid 1337: The security ID structure is invalid 1338: The security descriptor structure is invalid 1340: The inherited access control list (ACL) or access control entry (ACE) could not be built 1341: The server is currently disabled 1342: The server is currently enabled 1343: The value provided was an invalid value for an identifier authority 1344: No more memory is available for security information updates 1345: The specified attributes are invalid, or incompatible with the attributes for the group as a whole 1346: Either a required impersonation level was not provided, or the provided impersonation level is invalid 1347: Cannot open an anonymous level security token 1348: The validation information class requested was invalid 1349: The type of the token is inappropriate for its attempted use 1350: Unable to perform a security operation on an object that has no associated security 1351: Configuration information could not be read from the domain controller, either because the machine is unavailable, or access has been denied 1352: The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation 1353: The domain was in the wrong state to perform the security operation 1354: This operation is only allowed for the Primary Domain Controller of the domain 1355: The specified domain either does not exist or could not be contacted 1356: The specified domain already exists 1357: An attempt was made to exceed the limit on the number of domains per server 1358: Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk 1359: An internal error occurred 1360: Generic access types were contained in an access mask which should already be mapped to nongeneric types 1361: A security descriptor is not in the right format (absolute or self-relative) 1362: The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process 1363: Cannot start a new logon session with an ID that is already in use 1364: A specified authentication package is unknown 1365: The logon session is not in a state that is consistent with the requested operation 1366: The logon session ID is already in use 1367: A logon request contained an invalid logon type value 1368: Unable to impersonate using a named pipe until data has been read from that pipe 1369: The transaction state of a registry subtree is incompatible with the requested operation 1370: An internal security database corruption has been encountered 1371: Cannot perform this operation on built-in accounts 1372: Cannot perform this operation on this built-in special group 1373: Cannot perform this operation on this built-in special user 1374: The user cannot be removed from a group because the group is currently the user's primary group 1375: The token is already in use as a primary token 1376: The specified local group does not exist 1377: The specified account name is not a member of the local group 1378: The specified account name is already a member of the local group 1379: The specified local group already exists 1380: Logon failure: the user has not been granted the requested logon type at this computer 1381: The maximum number of secrets that may be stored in a single system has been exceeded 1382: The length of a secret exceeds the maximum length allowed 1383: The local security authority database contains an internal inconsistency 1384: During a logon attempt, the user's security context accumulated too many security IDs 1385: Logon failure: the user has not been granted the requested logon type at this computer 1386: A cross-encrypted password is necessary to change a user password 1387: A member could not be added to or removed from the local group because the member does not exist 1388: A new member could not be added to a local group because the member has the wrong account type 1389: Too many security IDs have been specified 1390: A cross-encrypted password is necessary to change this user password 1391: Indicates an ACL contains no inheritable components 1392: The file or directory is corrupted and unreadable 1393: The disk structure is corrupted and unreadable 1394: There is no user session key for the specified logon session 1395: The service being accessed is licensed for a particular number of connections. No more connections can be made to the service at this time because there are already as many connections as the service can accept 1396: Logon Failure: The target account name is incorrect 1397: Mutual Authentication failed. The server's password is out of date at the domain controller 1398: There is a time and/or date difference between the client and server 1399: This operation can not be performed on the current domain 1400: Invalid window handle 1401: Invalid menu handle 1402: Invalid cursor handle 1403: Invalid accelerator table handle 1404: Invalid hook handle 1405: Invalid handle to a multiple-window position structure 1406: Cannot create a top-level child window 1407: Cannot find window class 1408: Invalid window; it belongs to other thread 1409: Hot key is already registered 1410: Class already exists 1411: Class does not exist 1412: Class still has open windows 1413: Invalid index 1414: Invalid icon handle 1415: Using private DIALOG window words 1416: The list box identifier was not found 1417: No wildcards were found 1418: Thread does not have a clipboard open 1419: Hot key is not registered 1420: The window is not a valid dialog window 1421: Control ID not found 1422: Invalid message for a combo box because it does not have an edit control 1423: The window is not a combo box 1424: Height must be less than 256 1425: Invalid device context (DC) handle 1426: Invalid hook procedure type 1427: Invalid hook procedure 1428: Cannot set nonlocal hook without a module handle 1429: This hook procedure can only be set globally 1430: The journal hook procedure is already installed 1431: The hook procedure is not installed 1432: Invalid message for single-selection list box 1433: LB_SETCOUNT sent to non-lazy list box 1434: This list box does not support tab stops 1435: Cannot destroy object created by another thread 1436: Child windows cannot have menus 1437: The window does not have a system menu 1438: Invalid message box style 1439: Invalid system-wide (SPI_*) parameter 1440: Screen already locked 1441: All handles to windows in a multiple-window position structure must have the same parent 1442: The window is not a child window 1443: Invalid GW_* command 1444: Invalid thread identifier 1445: Cannot process a message from a window that is not a multiple document interface (MDI) window 1446: Popup menu already active 1447: The window does not have scroll bars 1448: Scroll bar range cannot be greater than MAXLONG 1449: Cannot show or remove the window in the way specified 1450: Insufficient system resources exist to complete the requested service 1451: Insufficient system resources exist to complete the requested service 1452: Insufficient system resources exist to complete the requested service 1453: Insufficient quota to complete the requested service 1454: Insufficient quota to complete the requested service 1455: The paging file is too small for this operation to complete 1456: A menu item was not found 1457: Invalid keyboard layout handle 1458: Hook type not allowed 1459: This operation requires an interactive window station 1460: This operation returned because the timeout period expired 1461: Invalid monitor handle 1500: The event log file is corrupted 1501: No event log file could be opened, so the event logging service did not start 1502: The event log file is full 1503: The event log file has changed between read operations 1601: The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance 1602: User cancelled installation 1603: Fatal error during installation 1604: Installation suspended, incomplete 1605: This action is only valid for products that are currently installed 1606: Feature ID not registered 1607: Component ID not registered 1608: Unknown property 1609: Handle is in an invalid state 1610: The configuration data for this product is corrupt. Contact your support personnel 1611: Component qualifier not present 1612: The installation source for this product is not available. Verify that the source exists and that you can access it 1613: This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service 1614: Product is uninstalled 1615: SQL query syntax invalid or unsupported 1616: Record field does not exist 1617: The device has been removed 1618: Another installation is already in progress. Complete that installation before proceeding with this install 1619: This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package 1620: This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package 1621: There was an error starting the Windows Installer service user interface. Contact your support personnel 1622: Error opening installation log file. Verify that the specified log file location exists and that you can write to it 1623: The language of this installation package is not supported by your system 1624: Error applying transforms. Verify that the specified transform paths are valid 1625: This installation is forbidden by system policy. Contact your system administrator 1626: Function could not be executed 1627: Function failed during execution 1628: Invalid or unknown table specified 1629: Data supplied is of wrong type 1630: Data of this type is not supported 1631: The Windows Installer service failed to start. Contact your support personnel 1632: The Temp folder is on a drive that is full or is inaccessible. Free up space on the drive or verify that you have write permission on the Temp folder 1633: This installation package is not supported by this processor type. Contact your product vendor 1634: Component not used on this computer 1635: This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package 1636: This patch package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer patch package 1637: This patch package cannot be processed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service 1638: Another version of this product is already installed. Installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs on the Control Panel 1639: Invalid command line argument. Consult the Windows Installer SDK for detailed command line help 1640: Only administrators have permission to add, remove, or configure server software during a Terminal services remote session. If you want to install or configure software on the server, contact your network administrator 1641: The requested operation completed successfully. The system will be restarted so the changes can take effect 1643: The patch package is not permitted by software restriction policy 1644: One or more customizations are not permitted by software restriction policy 1700: The string binding is invalid 1701: The binding handle is not the correct type 1702: The binding handle is invalid 1703: The RPC protocol sequence is not supported 1704: The RPC protocol sequence is invalid 1705: The string universal unique identifier (UUID) is invalid 1706: The endpoint format is invalid 1707: The network address is invalid 1708: No endpoint was found 1709: The timeout value is invalid 1710: The object universal unique identifier (UUID) was not found 1711: The object universal unique identifier (UUID) has already been registered 1712: The type universal unique identifier (UUID) has already been registered 1713: The RPC server is already listening 1714: No protocol sequences have been registered 1715: The RPC server is not listening 1716: The manager type is unknown 1717: The interface is unknown 1718: There are no bindings 1719: There are no protocol sequences 1720: The endpoint cannot be created 1721: Not enough resources are available to complete this operation 1722: The RPC server is unavailable 1723: The RPC server is too busy to complete this operation 1724: The network options are invalid 1725: There are no remote procedure calls active on this thread 1726: The remote procedure call failed 1727: The remote procedure call failed and did not execute 1728: A remote procedure call (RPC) protocol error occurred 1730: The transfer syntax is not supported by the RPC server 1732: The universal unique identifier (UUID) type is not supported 1733: The tag is invalid 1734: The array bounds are invalid 1735: The binding does not contain an entry name 1736: The name syntax is invalid 1737: The name syntax is not supported 1739: No network address is available to use to construct a universal unique identifier (UUID) 1740: The endpoint is a duplicate 1741: The authentication type is unknown 1742: The maximum number of calls is too small 1743: The string is too long 1744: The RPC protocol sequence was not found 1745: The procedure number is out of range 1746: The binding does not contain any authentication information 1747: The authentication service is unknown 1748: The authentication level is unknown 1749: The security context is invalid 1750: The authorization service is unknown 1751: The entry is invalid 1752: The server endpoint cannot perform the operation 1753: There are no more endpoints available from the endpoint mapper 1754: No interfaces have been exported 1755: The entry name is incomplete 1756: The version option is invalid 1757: There are no more members 1758: There is nothing to unexport 1759: The interface was not found 1760: The entry already exists 1761: The entry is not found 1762: The name service is unavailable 1763: The network address family is invalid 1764: The requested operation is not supported 1765: No security context is available to allow impersonation 1766: An internal error occurred in a remote procedure call (RPC) 1767: The RPC server attempted an integer division by zero 1768: An addressing error occurred in the RPC server 1769: A floating-point operation at the RPC server caused a division by zero 1770: A floating-point underflow occurred at the RPC server 1771: A floating-point overflow occurred at the RPC server 1772: The list of RPC servers available for the binding of auto handles has been exhausted 1773: Unable to open the character translation table file 1774: The file containing the character translation table has fewer than 512 bytes 1775: A null context handle was passed from the client to the host during a remote procedure call 1777: The context handle changed during a remote procedure call 1778: The binding handles passed to a remote procedure call do not match 1779: The stub is unable to get the remote procedure call handle 1780: A null reference pointer was passed to the stub 1781: The enumeration value is out of range 1782: The byte count is too small 1783: The stub received bad data 1784: The supplied user buffer is not valid for the requested operation 1785: The disk media is not recognized. It may not be formatted 1786: The workstation does not have a trust secret 1787: The security database on the server does not have a computer account for this workstation trust relationship 1788: The trust relationship between the primary domain and the trusted domain failed 1789: The trust relationship between this workstation and the primary domain failed 1790: The network logon failed 1791: A remote procedure call is already in progress for this thread 1792: An attempt was made to logon, but the network logon service was not started 1793: The user's account has expired 1794: The redirector is in use and cannot be unloaded 1795: The specified printer driver is already installed 1796: The specified port is unknown 1797: The printer driver is unknown 1798: The print processor is unknown 1799: The specified separator file is invalid 1800: The specified priority is invalid 1801: The printer name is invalid 1802: The printer already exists 1803: The printer command is invalid 1804: The specified datatype is invalid 1805: The environment specified is invalid 1806: There are no more bindings 1807: The account used is an interdomain trust account. Use your global user account or local user account to access this server 1808: The account used is a computer account. Use your global user account or local user account to access this server 1809: The account used is a server trust account. Use your global user account or local user account to access this server 1810: The name or security ID (SID) of the domain specified is inconsistent with the trust information for that domain 1811: The server is in use and cannot be unloaded 1812: The specified image file did not contain a resource section 1813: The specified resource type cannot be found in the image file 1814: The specified resource name cannot be found in the image file 1815: The specified resource language ID cannot be found in the image file 1816: Not enough quota is available to process this command 1817: No interfaces have been registered 1818: The remote procedure call was cancelled 1819: The binding handle does not contain all required information 1820: A communications failure occurred during a remote procedure call 1821: The requested authentication level is not supported 1822: No principal name registered 1823: The error specified is not a valid Windows RPC error code 1824: A UUID that is valid only on this computer has been allocated 1825: A security package specific error occurred 1826: Thread is not canceled 1827: Invalid operation on the encoding/decoding handle 1828: Incompatible version of the serializing package 1829: Incompatible version of the RPC stub 1830: The RPC pipe object is invalid or corrupted 1831: An invalid operation was attempted on an RPC pipe object 1832: Unsupported RPC pipe version 1898: The group member was not found 1899: The endpoint mapper database entry could not be created 1900: The object universal unique identifier (UUID) is the nil UUID 1901: The specified time is invalid 1902: The specified form name is invalid 1903: The specified form size is invalid 1904: The specified printer handle is already being waited on 1905: The specified printer has been deleted 1906: The state of the printer is invalid 1907: The user's password must be changed before logging on the first time 1908: Could not find the domain controller for this domain 1909: The referenced account is currently locked out and may not be logged on to 1910: The object exporter specified was not found 1911: The object specified was not found 1912: The object resolver set specified was not found 1913: Some data remains to be sent in the request buffer 1914: Invalid asynchronous remote procedure call handle 1915: Invalid asynchronous RPC call handle for this operation 1916: The RPC pipe object has already been closed 1917: The RPC call completed before all pipes were processed 1918: No more data is available from the RPC pipe 1919: No site name is available for this machine 1920: The file can not be accessed by the system 1921: The name of the file cannot be resolved by the system 1922: The entry is not of the expected type 1923: Not all object UUIDs could be exported to the specified entry 1924: Interface could not be exported to the specified entry 1925: The specified profile entry could not be added 1926: The specified profile element could not be added 1927: The specified profile element could not be removed 1928: The group element could not be added 1929: The group element could not be removed 1930: The printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers 1931: The context has expired and can no longer be used 2000: The pixel format is invalid 2001: The specified driver is invalid 2002: The window style or class attribute is invalid for this operation 2003: The requested metafile operation is not supported 2004: The requested transformation operation is not supported 2005: The requested clipping operation is not supported 2010: The specified color management module is invalid 2011: The specified color profile is invalid 2012: The specified tag was not found 2013: A required tag is not present 2014: The specified tag is already present 2015: The specified color profile is not associated with any device 2016: The specified color profile was not found 2017: The specified color space is invalid 2018: Image Color Management is not enabled 2019: There was an error while deleting the color transform 2020: The specified color transform is invalid 2021: The specified transform does not match the bitmap's color space 2022: The specified named color index is not present in the profile 2102: The workstation driver is not installed 2103: The server could not be located 2104: An internal error occurred. The network cannot access a shared memory segment 2105: A network resource shortage occurred 2106: This operation is not supported on workstations 2107: The device is not connected 2108: The network connection was made successfully, but the user had to be prompted for a password other than the one originally specified 2109: The network connection was made successfully using default credentials 2114: The Server service is not started 2115: The queue is empty 2116: The device or directory does not exist 2117: The operation is invalid on a redirected resource 2118: The name has already been shared 2119: The server is currently out of the requested resource 2121: Requested addition of items exceeds the maximum allowed 2122: The Peer service supports only two simultaneous users 2123: The API return buffer is too small 2127: A remote API error occurred 2131: An error occurred when opening or reading the configuration file 2136: A general network error occurred 2137: The Workstation service is in an inconsistent state. Restart the computer before restarting the Workstation service 2138: The Workstation service has not been started 2139: The requested information is not available 2140: An internal Windows 2000 error occurred 2141: The server is not configured for transactions 2142: The requested API is not supported on the remote server 2143: The event name is invalid 2144: The computer name already exists on the network. Change it and restart the computer 2146: The specified component could not be found in the configuration information 2147: The specified parameter could not be found in the configuration information 2149: A line in the configuration file is too long 2150: The printer does not exist 2151: The print job does not exist 2152: The printer destination cannot be found 2153: The printer destination already exists 2154: The printer queue already exists 2155: No more printers can be added 2156: No more print jobs can be added 2157: No more printer destinations can be added 2158: This printer destination is idle and cannot accept control operations 2159: This printer destination request contains an invalid control function 2160: The print processor is not responding 2161: The spooler is not running 2162: This operation cannot be performed on the print destination in its current state 2163: This operation cannot be performed on the printer queue in its current state 2164: This operation cannot be performed on the print job in its current state 2165: A spooler memory allocation failure occurred 2166: The device driver does not exist 2167: The data type is not supported by the print processor 2168: The print processor is not installed 2180: The service database is locked 2181: The service table is full 2182: The requested service has already been started 2183: The service does not respond to control actions 2184: The service has not been started 2185: The service name is invalid 2186: The service is not responding to the control function 2187: The service control is busy 2188: The configuration file contains an invalid service program name 2189: The service could not be controlled in its present state 2190: The service ended abnormally 2191: The requested pause or stop is not valid for this service 2192: The service control dispatcher could not find the service name in the dispatch table 2193: The service control dispatcher pipe read failed 2194: A thread for the new service could not be created 2200: This workstation is already logged on to the local-area network 2201: The workstation is not logged on to the local-area network 2202: The specified username is invalid 2203: The password parameter is invalid 2204: The logon processor did not add the message alias 2205: The logon processor did not add the message alias 2206: The logoff processor did not delete the message alias 2207: The logoff processor did not delete the message alias 2209: Network logons are paused 2210: A centralized logon-server conflict occurred 2211: The server is configured without a valid user path 2212: An error occurred while loading or running the logon script 2214: The logon server was not specified. Your computer will be logged on as STANDALONE 2215: The logon server could not be found 2216: There is already a logon domain for this computer 2217: The logon server could not validate the logon 2219: The security database could not be found 2220: The group name could not be found 2221: The user name could not be found 2222: The resource name could not be found 2223: The group already exists 2224: The account already exists 2225: The resource permission list already exists 2226: This operation is only allowed on the primary domain controller of the domain 2227: The security database has not been started 2228: There are too many names in the user accounts database 2229: A disk I/O failure occurred 2230: The limit of 64 entries per resource was exceeded 2231: Deleting a user with a session is not allowed 2232: The parent directory could not be located 2233: Unable to add to the security database session cache segment 2234: This operation is not allowed on this special group 2235: This user is not cached in user accounts database session cache 2236: The user already belongs to this group 2237: The user does not belong to this group 2238: This user account is undefined 2239: This user account has expired 2240: The user is not allowed to log on from this workstation 2241: The user is not allowed to log on at this time 2242: The password of this user has expired 2243: The password of this user cannot change 2244: This password cannot be used now 2245: The password does not meet the password policy requirements. Check the minimum password length, password complexity and password history requirements 2246: The password of this user is too recent to change 2247: The security database is corrupted 2248: No updates are necessary to this replicant network/local security database 2249: This replicant database is outdated; synchronization is required 2250: This network connection does not exist 2251: This asg_type is invalid 2252: This device is currently being shared 2270: The computer name could not be added as a message alias. The name may already exist on the network 2271: The Messenger service is already started 2272: The Messenger service failed to start 2273: The message alias could not be found on the network 2274: This message alias has already been forwarded 2275: This message alias has been added but is still forwarded 2276: This message alias already exists locally 2277: The maximum number of added message aliases has been exceeded 2278: The computer name could not be deleted 2279: Messages cannot be forwarded back to the same workstation 2280: An error occurred in the domain message processor 2281: The message was sent, but the recipient has paused the Messenger service 2282: The message was sent but not received 2283: The message alias is currently in use. Try again later 2284: The Messenger service has not been started 2285: The name is not on the local computer 2286: The forwarded message alias could not be found on the network 2287: The message alias table on the remote station is full 2288: Messages for this alias are not currently being forwarded 2289: The broadcast message was truncated 2294: This is an invalid device name 2295: A write fault occurred 2297: A duplicate message alias exists on the network 2298: This message alias will be deleted later 2299: The message alias was not successfully deleted from all networks 2300: This operation is not supported on computers with multiple networks 2310: This shared resource does not exist 2311: This device is not shared 2312: A session does not exist with that computer name 2314: There is not an open file with that identification number 2315: A failure occurred when executing a remote administration command 2316: A failure occurred when opening a remote temporary file 2317: The data returned from a remote administration command has been truncated to 64K 2318: This device cannot be shared as both a spooled and a non-spooled resource 2319: The information in the list of servers may be incorrect 2320: The computer is not active in this domain 2321: The share must be removed from the Distributed File System before it can be deleted 2331: The operation is invalid for this device 2332: This device cannot be shared 2333: This device was not open 2334: This device name list is invalid 2335: The queue priority is invalid 2337: There are no shared communication devices 2338: The queue you specified does not exist 2340: This list of devices is invalid 2341: The requested device is invalid 2342: This device is already in use by the spooler 2343: This device is already in use as a communication device 2351: This computer name is invalid 2354: The string and prefix specified are too long 2356: This path component is invalid 2357: Could not determine the type of input 2362: The buffer for types is not big enough 2370: Profile files cannot exceed 64K 2371: The start offset is out of range 2372: The system cannot delete current connections to network resources 2373: The system was unable to parse the command line in this file 2374: An error occurred while loading the profile file 2375: Errors occurred while saving the profile file. The profile was partially saved 2377: Log file %1 is full 2378: This log file has changed between reads 2379: Log file %1 is corrupt 2380: The source path cannot be a directory 2381: The source path is illegal 2382: The destination path is illegal 2383: The source and destination paths are on different servers 2385: The Run server you requested is paused 2389: An error occurred when communicating with a Run server 2391: An error occurred when starting a background process 2392: The shared resource you are connected to could not be found 2400: The LAN adapter number is invalid 2401: This network connection has files open or requests pending 2402: Active connections still exist 2403: This share name or password is invalid 2404: The device is in use by an active process and cannot be disconnected 2405: The drive letter is in use locally 2430: The specified client is already registered for the specified event 2431: The alert table is full 2432: An invalid or nonexistent alert name was raised 2433: The alert recipient is invalid 2434: A user's session with this server has been deleted because the user's logon hours are no longer vali 2440: The log file does not contain the requested record number 2450: The user accounts database is not configured correctly 2451: This operation is not permitted when the Netlogon service is running 2452: This operation is not allowed on the last administrative account 2453: Could not find domain controller for this domain 2454: Could not set logon information for this user 2455: The Netlogon service has not been started 2456: Unable to add to the user accounts database 2457: This server's clock is not synchronized with the primary domain controller's clock 2458: A password mismatch has been detected 2460: The server identification does not specify a valid server 2461: The session identification does not specify a valid session 2462: The connection identification does not specify a valid connection 2463: There is no space for another entry in the table of available servers 2464: The server has reached the maximum number of sessions it supports 2465: The server has reached the maximum number of connections it supports 2466: The server cannot open more files because it has reached its maximum number 2467: There are no alternate servers registered on this server 2470: Try down-level (remote admin protocol) version of API instead 2480: The UPS driver could not be accessed by the UPS service 2481: The UPS service is not configured correctly 2482: The UPS service could not access the specified Comm Port 2483: The UPS indicated -------------------- -=::BlackCat::=-  такой дуратцкий аватар потому как мой 100х100, а такие подгрузить нелзя, движок форума чо сам не может его переделать?? гррр, админ, форум косячит |
|||
|
||||
Дата 1.5.2004, 21:41 (
Загрузка ...
| Cheba |
|
|||
 pointless one Профиль Группа: Vingrad developer Сообщений: 1777 Регистрация: 27.11.2003 Где: /dev/null Репутация: нет Всего: 62 |
Чьи это ошибки?
|
|||
|
||||
| srd |
|
|||
 Нереварин Профиль Группа: Участник Клуба Сообщений: 951 Регистрация: 30.8.2003 Где: Владивосток Репутация: нет Всего: 49 |
Это коды, возвращаемые функцией GetLastError. Только непонятно, зачем они тут нужны, если есть http://msdn.microsoft.com/library/en-us/de...error_codes.asp
-------------------- Не смей читать мою подпись!!! |
|||
|
||||
| Medved |
|
|||
 Эксперт Профиль Группа: Завсегдатай Сообщений: 7209 Регистрация: 15.9.2002 Где: Kazakhstan, Astan a Репутация: нет Всего: 154 |
Мда.. катяра, фигней маешься...
-------------------- |
|||
|
||||
| Pakshin A. S. |
|
|||
|
Эксперт Профиль Группа: Участник Клуба Сообщений: 5056 Регистрация: 16.2.2003 Репутация: нет Всего: 61 |
-=::BlackCat::=-
Честно скажи: сам составлял или спёр...  |
|||
|
||||
| -=::BlackCat::=- |
|
|||
|
Эксперт Профиль Группа: Участник Клуба Сообщений: 1456 Регистрация: 12.7.2003 Где: растёт анаша? Репутация: нет Всего: 6 |
Сам.... генирировал, а потом в Блакноте пустату убирал
Добавлено @ 16:11 srd не все копаются в МСДН, я например долго мудохолся, с одной ошибкой так как низнал что она означает  -------------------- -=::BlackCat::=- такой дуратцкий аватар потому как мой 100х100, а такие подгрузить нелзя, движок форума чо сам не может его переделать?? гррр, админ, форум косячит |
|||
|
||||
|
|
| Правила форума "Delphi: WinAPI и системное программирование" | |
|
|
Запрещено: 1. Публиковать ссылки на вскрытые компоненты 2. Обсуждать взлом компонентов и делиться вскрытыми компонентами
Если Вам понравилась атмосфера форума, заходите к нам чаще! С уважением, Snowy, bartram, MetalFan, bems, Poseidon, Rrader, Riply. |
| 1 Пользователей читают эту тему (1 Гостей и 0 Скрытых Пользователей) | |
| 0 Пользователей: | |
| « Предыдущая тема | Delphi: WinAPI и системное программирование | Следующая тема » |
[ Время генерации скрипта: 0.1408 ] [ Использовано запросов: 23 ] [ GZIP включён ]
Реклама на сайте Информационное спонсорство
|
|
По вопросам размещения рекламы пишите на vladimir(sobaka)vingrad.ru
Отказ от ответственности Powered by Invision Power Board(R) 1.3 © 2003 IPS, Inc. |