Типа разобрался. План действий ниже. (может кому сгодиться)1. Снёс C++Builder 6.0 и CodeGear 2009. Почистил реестр (удалил ветки 6-ого и 9-ого дебилдера), папку Windows (*.bpl), Program Files, Common Files). Бутнулся.
2. Установил C++Builder 6.0 без индейцев. Бутнулся. Накатил 4-ый пак.
3. Скачал архив Indy 10 от сюда http://indy.fulgan.com/ZIP/.
4. Распаковал архив indy10.zip в "C:\indy10".
5. Запустил батник "C:\indy10\Lib\Fullc6.bat".
6. Создается папка "C:\indy10\C6"
7. Дальше распихиваю по папкам:
*.hpp -> "C:\Program files\Borland\CBuilder6\Include"
*.lib, *.bpi -> "C:\Program files\Borland\CBuilder6\Lib"
*.dcp, *.lsp, *.bpl -> "C:\Program files\Borland\CBuilder6\Bin"
8. Добавляю dclIndyCore60.bpl и dclIndyProtocols60.bpl в палитру компонентов ("Component" -> "Install packages.." -> "Add")
9. Запускаю дебилдер - индейцы стоят. Гы.
P.S. Прошлый раз индейцы работали при установленных C++Builder 6.0, CodeGear 2009.
Ниже http://www.programmersheaven.com/mb/bcbuilder/369957/369957/how-to-install-indy-9-in-builder-6/?S=B20000 на англ.
| Цитата |
"How do I install Indy into Borland C++ Builder? • Close the Borland C++ Builder IDE if it is open. • Temporarily copy IDPAS32.obj (C:\Program\Borland\CBuilder6\Source\vcl) to a temporary directory. You do not want to delete that file because it is NOT part of the Indy package. • Remove all Indy files including dclindy*.bpl, dclindy.*, indy*.lib, id*.pas, id*.hpp, id*.obj, and id*.dcu. Take care that you only remove the old Indy files and not something else. Be sure that you also remove any indy*.bpl from your Windows\System32 directory. • Restore IDPAS32.obj from the temporary directory you created earlier to the directory where it was originally located. • Remove all old Indy Help files, indy.*, from the Help subdirectory and replace them with the new ones. (indy.hlp, indy.cnt, indy.toc) • Place the new version of Indy in a directory of your choice. When unzipping, please keep the \source directory for the archive intact because that is used by some build batch files. • In the source directory, there are several batch files. Run the appropriate one for your version of Borland C++ Builder: • FULLC4.BAT - Borland C++ Builder 4 • FULLC5.BAT - Borland C++ Builder 5 • FULLC6.BAT - Borland C++ Builder 6 • These batch files create subdirectories in the main Indy directory folder. They are (C4 for C++Builder 4, C5 for C+Builder 5, and C6 for C++Builder 6). These directories contain: • The Indy .DCU files • The Indy .HPP files • The Indy .LIB file • The Indy .OBJ files • The Indy Design-Time .BPL • Open the Borland C++ Builder IDE. • *In your C++Builder IDE, add the Indy design-time package with Component|Install Package...|Add... Go to the subdirectory where the Indy .DCU's and Design-Time .BPL was placed by the batch file. Add the Design-Time .BPL that is listed. It usually is named dclIndy followed by the Borland C++ Builder version and an 0. • Add the path where the .DCU's are located to your environment. Do this with Tools|Environment Options...|Library...|Library Path... • Add the path where the .HPP's are located to your project. Do this with Project|Options|Directories|Conditionals|Include path. Check the box Default and click OK to save this setting. " |
P.S.
Там батники только под 4, 5, 6 билдеры. Под 2007 и 2009 нет.
Для CG 2009, Embarcadero 2010 (как С++ так и Delphi): http://indy.fulgan.com/ZIP/IndyTiburon.zip
FAQ:
http://kvendi.pp.ru/?p=66
