Модераторы: ZeeLax, powerfox
  

Поиск:

Ответ в темуСоздание новой темы Создание опроса
> Сколько ещё может прожить жесткий диск? 
:(
    Опции темы
mihanik
Дата 2.5.2011, 21:58 (ссылка) | (нет голосов) Загрузка ... Загрузка ... Быстрая цитата Цитата


-=Белый Медведь=-
****


Профиль
Группа: Комодератор
Сообщений: 4054
Регистрация: 24.4.2006
Где: г. Тверь

Репутация: нет
Всего: 109



Собственно сабж.

А вот его SMART

Что-то мне кажется, что крандец наступит скоро диску...
:-(
Жалко...

Код

smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.10 family
Device Model:     ST3160815AS
Serial Number:    9RA3JMX2
Firmware Version: 3.AAD
User Capacity:    160,040,803,840 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Mon May  2 22:51:31 2011 MSD
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)    Offline data collection activity
                    was completed without error.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:         ( 430) seconds.
Offline data collection
capabilities:             (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:     (   1) minutes.
Extended self-test routine
recommended polling time:     (  54) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   102   099   006    Pre-fail  Always       -       3768205
  3 Spin_Up_Time            0x0003   098   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1718
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   078   060   030    Pre-fail  Always       -       75108855
  9 Power_On_Hours          0x0032   096   096   000    Old_age   Always       -       3773
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1671
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       7642
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   065   047   045    Old_age   Always       -       35 (Lifetime Min/Max 20/37)
194 Temperature_Celsius     0x0022   035   053   000    Old_age   Always       -       35 (0 12 0 0)
195 Hardware_ECC_Recovered  0x001a   090   073   000    Old_age   Always       -       221454853
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       8
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       8
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 7914 (device log contains only the most recent five errors)
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 7914 occurred at disk power-on lifetime: 3716 hours (154 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 a1 5f fe 86 e0  Error: UNC at LBA = 0x0086fe5f = 8846943

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 00 00 00 fe 86 e0 00      00:34:39.800  READ VERIFY SECTOR(S) EXT
  42 00 00 00 fd 86 e0 00      00:34:39.797  READ VERIFY SECTOR(S) EXT
  42 00 00 00 fc 86 e0 00      00:34:39.795  READ VERIFY SECTOR(S) EXT
  42 00 00 00 fb 86 e0 00      00:34:39.794  READ VERIFY SECTOR(S) EXT
  42 00 00 00 fa 86 e0 00      00:34:39.792  READ VERIFY SECTOR(S) EXT

Error 7913 occurred at disk power-on lifetime: 3716 hours (154 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 c2 3e 5a 27 e0  Error: UNC at LBA = 0x00275a3e = 2579006

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 00 00 00 5a 27 e0 00      00:32:00.166  READ VERIFY SECTOR(S) EXT
  42 00 00 00 59 27 e0 00      00:32:00.163  READ VERIFY SECTOR(S) EXT
  42 00 00 00 58 27 e0 00      00:32:00.162  READ VERIFY SECTOR(S) EXT
  42 00 00 00 57 27 e0 00      00:32:00.160  READ VERIFY SECTOR(S) EXT
  42 00 00 00 56 27 e0 00      00:32:00.159  READ VERIFY SECTOR(S) EXT

Error 7912 occurred at disk power-on lifetime: 3716 hours (154 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 c6 3a 50 60 e0  Error: UNC at LBA = 0x0060503a = 6311994

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 00 00 00 50 60 e0 00      00:28:39.973  READ VERIFY SECTOR(S) EXT
  42 00 00 00 4f 60 e0 00      00:28:39.972  READ VERIFY SECTOR(S) EXT
  42 00 00 00 4e 60 e0 00      00:28:39.970  READ VERIFY SECTOR(S) EXT
  42 00 00 00 4d 60 e0 00      00:28:39.969  READ VERIFY SECTOR(S) EXT
  42 00 00 00 4c 60 e0 00      00:28:39.968  READ VERIFY SECTOR(S) EXT

Error 7911 occurred at disk power-on lifetime: 3716 hours (154 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 c9 37 72 5f e0  Error: UNC at LBA = 0x005f7237 = 6255159

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 00 00 00 72 5f e0 00      00:28:36.283  READ VERIFY SECTOR(S) EXT
  42 00 00 00 71 5f e0 00      00:28:36.281  READ VERIFY SECTOR(S) EXT
  42 00 00 00 70 5f e0 00      00:28:36.280  READ VERIFY SECTOR(S) EXT
  42 00 00 00 6f 5f e0 00      00:28:36.277  READ VERIFY SECTOR(S) EXT
  42 00 00 00 6e 5f e0 00      00:28:36.276  READ VERIFY SECTOR(S) EXT

Error 7910 occurred at disk power-on lifetime: 3716 hours (154 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 37 72 5f e0  Error: UNC at LBA = 0x005f7237 = 6255159

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 d8 08 37 72 5f e0 00      00:24:54.725  READ DMA EXT
  25 d8 01 00 00 00 e0 00      00:24:54.723  READ DMA EXT
  25 d8 08 2f 72 5f e0 00      00:24:54.722  READ DMA EXT
  25 d8 01 00 00 00 e0 00      00:24:54.721  READ DMA EXT
  25 d8 80 2f 72 5f e0 00      00:24:54.721  READ DMA EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      3733         -
# 2  Extended offline    Completed: read failure       90%      3733         6255159
# 3  Short offline       Completed without error       00%        10         -
# 4  Short offline       Completed without error       00%         4         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.



--------------------
Программистами не рождаются, - это родовая травма...
user posted imageuser posted image
PM MAIL WWW ICQ   Вверх
  
Ответ в темуСоздание новой темы Создание опроса
Правила форума "Linux/UNIX: Hardware"
Imple
ZeeLax
nickless

В этом форуме предпочтительны вопросы на следующие темы:

  • Поиск и установка драйверов для *n?x-систем.
  • Настройка различных устройств (например звука или аппаратного ускорения видео).
  • Выбор *n?x совместимого железа, обмен опытом и.т.д.


Вопросы мобильной разработки тут

Вопросы о настройке системы (например разбивка и форматирование диска, настройка сети) сюда не относятся.


Чтобы получить наибольшую пользу от данного раздела, убедитесь, что вы четко сформулировали свой вопрос и привели точные данные о конфигурации компьютера, а так же указали версию драйвера, версию ОС и версию ядра.
При проблемах с железом желательно указывать вывод комманд lspci, lsusb и dmesg (запускать под root-ом), содержимое соответствующих логов (лежат в /var/log) и конфигурационных файлов (лежат в /etc). Чем больше информации мы получим, тем быстрее сможем помочь Вам.


  • Вы должны соблюдать правила форума.
  • Помните: какой вопрос, такой и ответ. Прежде чем задать вопрос прочитайте вот эту статью на форуме CIT.
  • Оскорблять запрещается.
  • Религиозные войны в Религиозных войнах.
  • Общение "просто так" в Клубе юнуксоидов. В отличие от многих других разделов, здесь разрешается сдержанно оффтопить и юморить в тему.

За интересные статьи, находки, решения, программы и просто реальную помощь будут ставиться + в репу).


В данный момент этот раздел модерируют nerezus, nickless, powerfox, pythonwin, Imple и ZeeLax. Если вы хотите помочь нам, пишите в ПМ и мы обсудим.


Спасибо. И use UNIX or die; С уважением, nerezus, nickless, powerfox, pythonwin, Imple, ZeeLax.

 
1 Пользователей читают эту тему (1 Гостей и 0 Скрытых Пользователей)
0 Пользователей:
« Предыдущая тема | *NIX и Hardware | Следующая тема »


 




[ Время генерации скрипта: 0.0796 ]   [ Использовано запросов: 21 ]   [ GZIP включён ]


Реклама на сайте     Информационное спонсорство

 
По вопросам размещения рекламы пишите на vladimir(sobaka)vingrad.ru
Отказ от ответственности     Powered by Invision Power Board(R) 1.3 © 2003  IPS, Inc.