-=Белый Медведь=-
Профиль
Группа: Комодератор
Сообщений: 4054
Регистрация: 24.4.2006
Где: г. Тверь
Репутация: 13
Всего: 109
|
Блин!!! Сколько же проблем у людей, кто имеет мамку c чипсетом, как у меня... Очень часто наблюдают в логах ошибку типа "via-rhine: Broken BIOS detected, avoid_D3 enabled" у многих проблемы с таймером с зависаниями и т.п... Решения пока не нашёл. Добавлено через 2 минуты и 37 секундЦитата(A5uKa @ 1.10.2010, 15:14  ) | что выдаёт
# dmesg |
| Цитата |
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32.21-168.fc12.i686.PAE ([email protected]) (gcc version 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #1 SMP Wed Sep 15 16:18:39 UTC 2010
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
DMI 2.2 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x3fef0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 03FF00000 mask FFFF00000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1023MB, range: 1MB, type UC
total RAM covered: 1023M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 1GB, type WB
reg 1, base: 1023MB, range: 1MB, type UC
initial memory mapped : 0 - 01000000
init_memory_mapping: 0000000000000000-00000000375fe000
Using x86 segment limits to approximate NX protection
0000000000 - 0000200000 page 4k
0000200000 - 0037400000 page 2M
0037400000 - 00375fe000 page 4k
kernel direct mapping tables up to 375fe000 @ 10000-18000
RAMDISK: 374c7000 - 37fef643
Allocated new RAMDISK: 00b6b000 - 01693643
Move RAMDISK from 00000000374c7000 - 0000000037fef642 to 00b6b000 - 01693642
ACPI: RSDP 000f6e10 00014 (v00 IntelR)
ACPI: RSDT 3fef3000 0002C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 3fef3040 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 3fef30c0 03F28 (v01 INTELR AWRDACPI 00001000 MSFT 0100000E)
ACPI: FACS 3fef0000 00040
ACPI: APIC 3fef7000 00068 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: Local APIC address 0xfee00000
136MB HIGHMEM available.
885MB LOWMEM available.
mapped low ram: 0 - 375fe000
low ram: 0 - 375fe000
node 0 low ram: 00000000 - 375fe000
node 0 bootmap 00014000 - 0001aec0
(9 early reservations) ==> bootmem [0000000000 - 00375fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000400000 - 0000b61c38] TEXT DATA BSS ==> [0000400000 - 0000b61c38]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0000b62000 - 0000b6a072] BRK ==> [0000b62000 - 0000b6a072]
#6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
#7 [0000b6b000 - 0001693643] NEW RAMDISK ==> [0000b6b000 - 0001693643]
#8 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000]
found SMP MP-table at [c00f52a0] f52a0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000375fe
HighMem 0x000375fe -> 0x0003fef0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003fef0
On node 0 totalpages: 261759
free_area_init_node: node 0, pgdat c09d8aa0, node_mem_map c1695200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1740 pages used for memmap
Normal zone: 220978 pages, LIFO batch:31
HighMem zone: 274 pages used for memmap
HighMem zone: 34784 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:bed00000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 15 pages/cpu @c2000000 s37848 r0 d23592 u1048576
pcpu-alloc: s37848 r0 d23592 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259713
Kernel command line: ro root=/dev/mapper/vg_leducation03-lv_root LANG=ru_RU.UTF-8 KEYBOARDTYPE=pc KEYTABLE=ru rhgb quiet
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 5237120 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (000375fe:0003fef0)
Memory: 1013328k/1047488k available (3762k kernel code, 33304k reserved, 2353k data, 564k init, 140232k highmem)
virtual kernel memory layout:
fixmap : 0xffad5000 - 0xfffff000 (5288 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc09fa000 - 0xc0a87000 ( 564 kB)
.data : 0xc07acb34 - 0xc09f9158 (2353 kB)
.text : 0xc0400000 - 0xc07acb34 (3762 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2411.377 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4822.75 BogoMIPS (lpj=2411377)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Performance Events: no PMU driver, software events only.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22772 entries in 45 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel® Celeron® CPU 2.40GHz stepping 04
Brought up 1 CPUs
Total of 1 processors activated (4822.75 BogoMIPS).
sizeof(vma)=92 bytes
sizeof(page)=32 bytes
sizeof(inode)=352 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=508 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=184 bytes
sizeof(task_struct)=3252 bytes
CPU0 attaching NULL sched-domain.
devtmpfs: initialized
regulator: core version 0.5
Time: 12:04:17 Date: 10/01/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb070, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 10 32bit mmio pref: [0xe0000000-0xe7ffffff]
pci 0000:00:02.0: reg 14 32bit mmio: [0xe8100000-0xe817ffff]
pci 0000:00:1d.0: reg 20 io port: [0xd800-0xd81f]
pci 0000:00:1d.1: reg 20 io port: [0xd000-0xd01f]
pci 0000:00:1d.2: reg 20 io port: [0xd400-0xd41f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xe8180000-0xe81803ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.1: reg 20 io port: [0xf000-0xf00f]
pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
pci 0000:00:1f.5: reg 10 io port: [0xe000-0xe0ff]
pci 0000:00:1f.5: reg 14 io port: [0xe400-0xe43f]
pci 0000:00:1f.5: reg 18 32bit mmio: [0xe8181000-0xe81811ff]
pci 0000:00:1f.5: reg 1c 32bit mmio: [0xe8182000-0xe81820ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.5: PME# disabled
pci 0000:01:05.0: reg 10 io port: [0xc000-0xc0ff]
pci 0000:01:05.0: reg 14 32bit mmio: [0xe8000000-0xe80000ff]
pci 0000:01:05.0: supports D1 D2
pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:05.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
pci 0000:00:1e.0: bridge 32bit mmio: [0xe8000000-0xe80fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 128 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: ioport range 0xb78-0xb7b has been reserved
system 00:01: ioport range 0xf78-0xf7b has been reserved
system 00:01: ioport range 0xa78-0xa7b has been reserved
system 00:01: ioport range 0xe78-0xe7b has been reserved
system 00:01: ioport range 0xbbc-0xbbf has been reserved
system 00:01: ioport range 0xfbc-0xfbf has been reserved
system 00:01: ioport range 0x4d0-0x4d1 has been reserved
system 00:01: ioport range 0x294-0x297 has been reserved
system 00:0d: ioport range 0x400-0x4bf could not be reserved
system 00:0f: iomem range 0xcb400-0xcbfff has been reserved
system 00:0f: iomem range 0xf0000-0xf7fff could not be reserved
system 00:0f: iomem range 0xf8000-0xfbfff could not be reserved
system 00:0f: iomem range 0xfc000-0xfffff could not be reserved
system 00:0f: iomem range 0x3fef0000-0x3fefffff could not be reserved
system 00:0f: iomem range 0x0-0x9ffff could not be reserved
system 00:0f: iomem range 0x100000-0x3feeffff could not be reserved
system 00:0f: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0f: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0f: iomem range 0xffb00000-0xffb7ffff has been reserved
system 00:0f: iomem range 0xfff00000-0xffffffff has been reserved
system 00:0f: iomem range 0xe0000-0xeffff has been reserved
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0: IO window: 0xc000-0xcfff
pci 0000:00:1e.0: MEM window: 0xe8000000-0xe80fffff
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0xe8000000-0xe80fffff]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 11425k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1285934657.713:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1728
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
fan PNP0C0B:00: registered as cooling_device0
ACPI: Fan [FAN] (on)
processor LNXCPU:00: registered as cooling_device1
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (22 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 830M Chipset
agpgart-intel 0000:00:00.0: detected 892K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input2
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe8180000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32.21-168.fc12.i686.PAE ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32.21-168.fc12.i686.PAE uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: [email protected]
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
nf_conntrack version 0.5.0 (16018 buckets, 64072 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: © 2000-2006 Netfilter Core Team
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
No TPM chip found, activating TPM-bypass!
Magic number: 14:881:75
rtc_cmos 00:03: setting system clock to 2010-10-01 12:04:19 UTC (1285934659)
Initalizing network drop monitor service
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
psmouse serio1: ID: 10 00 64
ata1.00: ATA-6: ST340014A, 3.06, max UDMA/100
ata1.00: 78165360 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST340014A 3.06 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 564k freed
Write protecting the kernel text: 3764k
Write protecting the kernel read-only data: 1772k
dracut: dracut-005-2.fc12
udev: starting version 145
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
[drm] set up 7M of stolen space
[drm] initialized overlay support
fbcon: inteldrmfb (fb0) is primary device
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
Console: switching to colour frame buffer device 160x64
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
dracut: Scanning devices sda2 for LVM volume groups
dracut: Reading all physical volumes. This may take a while...
dracut: Found volume group "vg_leducation03" using metadata type lvm2
dracut: 2 logical volume(s) in volume group "vg_leducation03" now active
EXT4-fs (dm-0): mounted filesystem with ordered data mode
dracut: Mounted root filesystem /dev/mapper/vg_leducation03-lv_root
dracut: Loading SELinux policy
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1285934662.299:2): selinux=0 auid=4294967295 ses=4294967295
dracut: /sbin/load_policy: :
dracut: Switching root
udev: starting version 145
gameport: NS558 PnP Gameport is pnp00:0c/gameport0, io 0x201, speed 852kHz
intel_rng: FWH not detected
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
via-rhine: Broken BIOS detected, avoid_D3 enabled.
via-rhine 0000:01:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
iTCO_vendor_support: vendor-support=0
eth0: VIA Rhine III at 0xe8000000, 00:04:61:6f:67:8f, IRQ 22.
eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link c5e1.
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ppdev: user-space parallel port driver
Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1f.5: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 50055 usecs (2413 samples)
intel8x0: clocking to 48000
device-mapper: multipath: version 1.1.0 loaded
EXT4-fs (sda1): mounted filesystem with ordered data mode
Adding 2064376k swap on /dev/mapper/vg_leducation03-lv_swap. Priority:-1 extents:1 across:2064376k
microcode: CPU0 sig=0xf34, pf=0x4, revision=0xe
platform microcode: firmware: requesting intel-ucode/0f-03-04
Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
microcode: CPU0 updated to revision 0x17, date = 2005-04-21
Microcode Update Driver: v2.00 removed.
p4-clockmod: P4/Xeon™ CPU On-Demand Clock Modulation available
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own
eth0: no IPv6 routers present
|
| Цитата(A5uKa @ 1.10.2010, 15:14 ) | | /var/log/Xorg.0.log и другие логи (kern.log) |
X.Org_X.txt 19,24 Kb--------------------
Программистами не рождаются, - это родовая травма...   |
Зависает Linux 
Загрузка ...
Дата 1.10.2010, 15:14 (
