Поставил Linux XP sp2, Perl-скрипты работают только с абсолютными ссылками. Как сделать, чтобы работали относительные ссылки в скриптах тоже?


Может вопрос и простой, но 2-й день роюсь в инете и книжке впустую.

Вот у меня та же проблема...

Описал такой виртуальный хост в Денвере (httpd.conf):

Код

<VirtualHost 127.0.0.2:80>   DocumentRoot "Z:/home/w3c-validator/www"   ServerName "w3c-validator"   ServerAlias "w3c-validator" "www.w3c-validator"   ScriptAlias /cgi/ "/home/w3c-validator/cgi/"   ScriptAlias /cgi-bin/ "/home/w3c-validator/cgi-bin/"   ScriptAlias /check "/home/w3c-validator/cgi-bin/check"   ScriptAliasMatch /feedback(\.html)?  "/home/w3c-validator/cgi-bin/sendfeedback.pl"   ErrorLog "/home/w3c-validator/error.log"   CustomLog "/home/w3c-validator/access.log" common #  Alias /w3c-validator/   "/home/w3c-validator/www/"   <Directory "/home/w3c-validator/www/">     Options               IncludesNOEXEC Indexes MultiViews     AllowOverride         None     AddHandler            server-parsed .html     AddCharset            utf-8         .html   </Directory> </VirtualHost>

только скрипт "check", не хочет вызываться, когда на него просто ссылаются по имени. Вот в "/home/w3c-validator/www/index.htm" есть форма:

Код

<form method="get" action="check"> ... </form>

только она не работает — сервер не может найти скрипт "check" (он пытается найти его в директории "/home/w3c-validator/www"), хотя в настройках виртуального хоста прописан алиас.

Как заставить его работать?
И ссылка "feedback.html", которая должна указывать на "/home/w3c-validator/cgi-bin/sendfeedback.pl", тоже не работает.

Я задал такой вопрос на 5-ти разных форумах и никто до сих пор не ответил. Может поставить какую-нибудь старую версию Apache?

Цитата(maximuswand)

Я задал такой вопрос на 5-ти разных форумах и никто до сих пор не ответил.

Одно из 2-х:
1) либо никто не знает (вряд ли)
2) либо никто не хочет отвечать на ламерские вопросы (скорее всего это уже 100 раз обсуждалось, хотя я не нашёл)

ЗЫ: как не странно, но я тоже задал этот вопрос на 2-х форумах и все молчат как партизаны...

Добавлено [21.11.05 - 21:27]:

2maximuswand:
Опиши подробнее свою проблему, заодно и прикрепи к сообщению свой конфиг Apache... может я чем смогу помочь...

Это сообщение отредактировал(а) Ciber SLasH - 21.11.2005, 21:22

Знакомых у меня спросить про Linux вообще нет, поэтому на инет одна надежда.

Пробовал установить форум YABB2.1. Скрипт setup.pl вызывает ошибку 500. Запись из Log-файла httpd

[Tue Nov 22 10:51:46 2005] [error] Can't locate ./Sources/Subs.pl in @INC (@INC contains: /usr/lib/perl5/5.8.5/i386-linux-thread-multi /usr/lib/perl5/5.8.5 /usr/lib/perl5/site_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.2/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/site_perl/5.8.5 /usr/lib/perl5/site_perl/5.8.4 /usr/lib/perl5/site_perl/5.8.3 /usr/lib/perl5/site_perl/5.8.2 /usr/lib/perl5/site_perl/5.8.1 /usr/lib/perl5/site_perl/5.8.0 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.4/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.3/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.2/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.1/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.0/i386-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.5 /usr/lib/perl5/vendor_perl/5.8.4 /usr/lib/perl5/vendor_perl/5.8.3 /usr/lib/perl5/vendor_perl/5.8.2 /usr/lib/perl5/vendor_perl/5.8.1 /usr/lib/perl5/vendor_perl/5.8.0 /usr/lib/perl5/vendor_perl . /etc/httpd/ /etc/httpd/lib/perl ./Modules ./Modules/Upload ./Modules/Digest) at /var/disk120/www/perl-cgi/yabb2/Setup.pl line 59.\n


Запускается этот:


setup.pl (форум)
...
# Check if it's blank Paths.pl or filled in one
unless ($lastsaved) {
$boardsdir = "./Boards";
$sourcedir = "./Sources";
$memberdir = "./Members";
$vardir = "./Variables";
}

$thisscript = "$ENV{'SCRIPT_NAME'}";
if (-e ("YaBB.cgi")) { $yyext = "cgi"; }
else { $yyext = "pl"; }
if ($boardurl) { $set_cgi = "$boardurl/Setup.$yyext"; }
else { $set_cgi = "Setup.$yyext"; }

# Make sure the module path is present
# Some servers need all the subdirs in @INC too.

push(@INC, "./Modules");
push(@INC, "./Modules/Upload");
push(@INC, "./Modules/Digest");


require "$sourcedir/Subs.pl";
require "$sourcedir/System.pl";
require "$sourcedir/Load.pl";
require "$sourcedir/DateTime.pl";
...

Я пробовал прописать вместо
...

$sourcedir = "./Sources";
...
$sourcedir = "/var/disk120/www/perl-cgi/yabb2/Sources"; [/color]

тогда на эту строку не ругается, но застревает дальше


Файлик httpd.conf(скопировал где-то с форума и исправил под себя как смог):


### Section 1: Global Environment
# Don't give away too much information about all the subcomponents
# we are running. Comment out this line if you don't mind remote sites
# finding out what major optional modules you are running
ServerTokens OS

ServerRoot "/etc/httpd"
#ScoreBoardFile run/httpd.scoreboard
PidFile "/var/run/httpd.pid"
TimeOut 300

#Разрешение запроса нескольких документов одновременно
KeepAlive false
MaxKeepAliveRequests 100
KeepAliveTimeout 15

# Кол-во запущенных изначально процессов httpd
<IfModule prefork.c>
StartServers 8
MinSpareServers 5
MaxSpareServers 20
MaxClients 150
MaxRequestsPerChild 100
</IfModule>

# Кол-во запущенных изначально процессов httpd
<IfModule worker.c>
StartServers 2
MaxClients 150
MinSpareThreads 25
MaxSpareThreads 75
ThreadsPerChild 25
MaxRequestsPerChild 0
</IfModule>

#Listen 12.34.56.78:80
Listen *:80

LoadModule access_module modules/mod_access.so
LoadModule auth_module modules/mod_auth.so
LoadModule auth_anon_module modules/mod_auth_anon.so
LoadModule auth_dbm_module modules/mod_auth_dbm.so
LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule ldap_module modules/mod_ldap.so
LoadModule auth_ldap_module modules/mod_auth_ldap.so
LoadModule include_module modules/mod_include.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule env_module modules/mod_env.so
LoadModule mime_magic_module modules/mod_mime_magic.so
LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule expires_module modules/mod_expires.so
LoadModule deflate_module modules/mod_deflate.so
LoadModule headers_module modules/mod_headers.so
LoadModule usertrack_module modules/mod_usertrack.so
LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule mime_module modules/mod_mime.so
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
LoadModule asis_module modules/mod_asis.so
LoadModule info_module modules/mod_info.so
LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
LoadModule imap_module modules/mod_imap.so
LoadModule actions_module modules/mod_actions.so
LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule cache_module modules/mod_cache.so
LoadModule suexec_module modules/mod_suexec.so
LoadModule disk_cache_module modules/mod_disk_cache.so
LoadModule file_cache_module modules/mod_file_cache.so
LoadModule mem_cache_module modules/mod_mem_cache.so
LoadModule cgi_module modules/mod_cgi.so

Include conf.d/*.conf

#ExtendedStatus On

### Section 2: 'Main' server configuration
User apache
Group apache
ServerAdmin root@localhost
ServerName shch21ftp
UseCanonicalName off

DocumentRoot "/var/disk120/www/html"


# Disable autoindex for the root directory, and present a
# default Welcome page if no other index page is present.
<LocationMatch "^/$">
Options -Indexes
ErrorDocument 403 /error/noindex.html
</LocationMatch>

#
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received.
#
# The path to the end user account 'public_html' directory must be
# accessible to the webserver userid. This usually means that ~userid
# must have permissions of 711, ~userid/public_html must have permissions
# of 755, and documents contained therein must be world-readable.
# Otherwise, the client will only receive a "403 Forbidden" message.
#
<IfModule mod_userdir.c>
#
# UserDir is disabled by default since it can confirm the presence
# of a username on the system (depending on home directory
# permissions).
#
UserDir "disable"
#
# To enable requests to /~user/ to serve the user's public_html
# directory, use this directive instead of "UserDir disable":
#
#UserDir public_html
</IfModule>

#
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
#
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
#
DirectoryIndex

#
# AccessFileName: The name of the file to look for in each directory
# for access control information. See also the AllowOverride directive.
#
AccessFileName .htaccess

#
# Запрет просмотра и скачивания
# viewed by Web clients.
#
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>

#
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
#
TypesConfig "/etc/mime.types"

# Тип потока по умолчанию
DefaultType text/plain

#
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#
<IfModule mod_mime_magic.c>
# MIMEMagicFile /usr/share/magic.mime
MIMEMagicFile conf/magic
</IfModule>

#
# Отображать клиентам IP-адрес или имя сервера
HostNameLookups Off

#
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs-2.0/mod/core.html#enablemmap
#
#EnableMMAP off

#
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
#
#EnableSendfile off

ErrorLog "/var/log/httpd/error_log"


# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
#
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent


#
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
#
# CustomLog logs/access_log common
CustomLog logs/access_log combined

#
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#
#CustomLog logs/referer_log referer
#CustomLog logs/agent_log agent

#
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#
#CustomLog logs/access_log combined

#
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
#
ServerSignature off

#
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
#
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
#
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
#
Alias /icons/ "/var/www/icons/"
Alias /perl-cgi/ "/var/disk120/www/perl-cgi/"
Alias /updates/ "/var/disk120/www/updates/"

#
# This should be changed to the ServerRoot/manual/. The alias provides
# the manual, even if you choose to move your DocumentRoot. You may comment
# this out if you do not care for the documentation.

#
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
#

<IfModule mod_cgid.c>
#
# Additional to mod_cgid.c settings, mod_cgid has Scriptsock <path>
# for setting UNIX socket for communicating with cgid.
#
#Scriptsock logs/cgisock
</IfModule>


#
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar


# Настройка обзора содержимого каталогов
IndexOptions FancyIndexing VersionSort NameWidth=*

# Иконки, которые показываются при обзоре каталогов (по расширению)
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip

AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*

AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core

AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^

DefaultIcon /icons/unknown.gif

#
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz

# Заголовок и описание перед обзором каталогов (для каждого каталога своё)
ReadmeName README.html
HeaderName HEADER.html

#
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
#
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t

# Сообщает браузеру, что архив можно открыть сразу и показать файлы
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz


DefaultLanguage ru

AddLanguage en .en
AddLanguage ru .ru

LanguagePriority ru en

#
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
#
ForceLanguagePriority Prefer Fallback

#AddDefaultCharset WINDOWS-1251

AddCharset WINDOWS-1251 .cp-1251 .win-1251
AddCharset CP866 .cp866
AddCharset KOI8-r .koi8-r .koi8-ru


# Сопоставление MIMIE типов и расширений
AddType application/x-tar .tgz
AddType audio/midi .mid .midi .kar

# Разрешение запуска CGI из любого места сервера, а не только из ScriptAlias
#AddHandler cgi-script .pl

#
# For files that include their own HTTP headers:
# Вроде как: отправлять заголовки как есть (не менять)
AddHandler send-as-is asis

#
# For server-parsed imagemap files:
#
AddHandler imap-file map

#
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
#
AddHandler type-map var

# Filters allow you to process content before it is sent to the client.
#
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#
AddOutputFilter INCLUDES .shtml

#
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
#

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#


Alias /error/ "/var/www/error/"

#
# The following directives modify normal HTTP response behavior to
# handle known problems with browser implementations.
#
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0

#
# The following directive disables redirects on non-GET requests for
# a directory that does not include the trailing slash. This fixes a
# problem with Microsoft WebFolders which does not appropriately handle
# redirects for folders with DAV methods.
#
BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully
BrowserMatch "^WebDrive" redirect-carefully
BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully
BrowserMatch "^gnome-vfs" redirect-carefully

#
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your-domain.com" to match your domain to enable.
#
#<Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
#</Location>

#
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your-domain.com" to match your domain to enable.
#
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
#</Location>

#
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#
#<IfModule mod_proxy.c>
#ProxyRequests On
#
#<Proxy *>
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
#</Proxy>

#
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
#
#ProxyVia On

#
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
#
#CacheRoot "/etc/httpd/proxy"
#CacheSize 5
#CacheGcInterval 4
#CacheMaxExpire 24
#CacheLastModifiedFactor 0.1
#CacheDefaultExpire 1
#NoCache a-domain.com another-domain.edu joes.garage-sale.com

#</IfModule>
# End of proxy directives.

### Section 3: Virtual Hosts
#
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
#
# Please see the documentation at
# <URL:http://httpd.apache.org/docs-2.0/vhosts/>
# for further details before you try to setup virtual hosts.
#
# You may use the command line option '-S' to verify your virtual host
# configuration.

#
# Use name-based virtual hosting.
#


# Where do we put the lock and pif files?
LockFile "/var/lock/httpd.lock"
CoreDumpDirectory "/etc/httpd"
#
# Virtual hosts
#

# Virtual host Default Virtual Host
<VirtualHost *>
ServerSignature email
DirectoryIndex index.php index.html index.htm index.shtml
LogLevel warn
HostNameLookups off
</VirtualHost>

#
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
#
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
#

<Directory "/">
# Options FollowSymLinks
AllowOverride None
Options Indexes Includes FollowSymLinks
# AllowOverride All
Allow from all

</Directory>

<Directory "/var/www/icons">
Options Indexes MultiViews
AllowOverride None
Allow from all
Order allow,deny
</Directory>

<Directory "/var/disk120/www/updates">
Options Indexes Includes FollowSymLinks
AllowOverride all
Allow from all
</Directory>

<Directory "/var/disk120/www/perl-cgi">
SetHandler perl-script
PerlResponseHandler ModPerl::Registry
PerlOptions +ParseHeaders
AllowOverride None
Options Indexes Includes FollowSymLinks
# AllowOverride All
Allow from all
Options +ExecCGI
</Directory>

Это сообщение отредактировал(а) maximuswand - 22.11.2005, 11:08

К сожалению у меня не хватает знаний ответить на твой вопрос

PS: нашёл статью по установке этого форума, может она поможет: http://web-support.ru/web-tech/yabb_1.shtml
PPS: По-моиму у тебя криво настроен Apache. Я сам в этом не силён, поэтому советую поискать в поисковике по запросу: (настройка|конфигурация) Apache Linux

Это сообщение отредактировал(а) Ciber SLasH - 23.11.2005, 12:52

Описание выложенное по ссылке не подходит для 2.1. В файликах каждый раз указывается ./modules и подобные ссылки.

А нет ли у кого рабочего файла httpd.conf? Чтобы поставить и забыть.